P-Wood Water Based Wood Preserver and Protector
P-Wood is a non-toxic, non-flammable, penetrating silica aero gel. P-Wood seals, waterproofs, and hardens wood products.
The proprietary catalyst in P-Wood reacts with both the acids and the alkali present in most woods forming an internal seal and barrier against water and other causes of deterioration.
P-Wood will not permanently alter the color, texture, or any other physical characteristic of the natural wood to which it is applied.
P-Wood makes a prepared surface 300% more effective in the bonding of varnish, stains, paint and mastics.
P-Wood is effective on surfaces above and below grade.
ADVANTAGES
- One-time application
- Helps wood retain natural color longer
- Leaves clear, natural finish with no surface film
- Retards penetration of grease, oils and acids
- Petrifies the wood
- Retards weather related deterioration
- Enables easier ice and snow removal
COVERAGE
- 150 sf per gallon
USES
- Docks
- Decks
- Wooden Basements
- Walkways/Boardwalks
- Shingles
- Fence Posts, Rails, and Slats
- Siding
- Log Homes
- Window Boxes, Frames and Sash
- Wooden Planters
P-Wood is water based, as such it should never be applied if the surface temperature is low enough to freeze the material, (i.g., An air temperature below 40 degree F).
CAUTION - PLEASE NOTE:
- Do not apply P-Wood to glass, glazed surfaces, or aluminum, as etching will occur. In case of accidental contact, rinse thoroughly and immediately with water.
- P-Wood is not meant to fill or seal visible cracks in wood.
- For surfaces not specified in our literature or if you are uncertain as to previous chemical treatments, (on the surface to which you are considering applying P-Wood), we recommend that P-Wood be applied to a small test area first.
- If P-Wood becomes frozen, thaw out completely and shake well to fully remix the material prior to using. Freezing will not harm the product.
Disclaimer
We believe this information to be true to the best of our knowledge. Our products are of the highest quality and uniform within manufacturing tolerances.
Since no control is exercised over product use, no warranty, expressed or implied, is made as to the suitability of products for a particular use or as to the suitability of products for a particular use or as to the effect of such use, and no liability is assumed, directly or indirectly.
Buyers and users are encouraged to conduct their own tests prior to application.
P-Wood Water Based Wood Preserver and Protector
P-Wood is a non-toxic, non-flammable, penetrating silica aero gel. P-Wood seals, waterproofs, and hardens wood products.
The proprietary catalyst in P-Wood reacts with both the acids and the alkali present in most woods forming an internal seal and barrier against water and other causes of deterioration.
P-Wood will not permanently alter the color, texture, or any other physical characteristic of the natural wood to which it is applied.
P-Wood makes a prepared surface 300% more effective in the bonding of varnish, stains, paint and mastics.
P-Wood is effective on surfaces above and below grade.
ADVANTAGES
- One-time application
- Helps wood retain natural color longer
- Leaves clear, natural finish with no surface film
- Retards penetration of grease, oils and acids
- Petrifies the wood
- Retards weather related deterioration
- Enables easier ice and snow removal
COVERAGE
- 150 sf per gallon
USES
- Docks
- Decks
- Wooden Basements
- Walkways/Boardwalks
- Shingles
- Fence Posts, Rails, and Slats
- Siding
- Log Homes
- Window Boxes, Frames and Sash
- Wooden Planters
P-Wood is water based, as such it should never be applied if the surface temperature is low enough to freeze the material, (i.g., An air temperature below 40 degree F).
CAUTION - PLEASE NOTE:
- Do not apply P-Wood to glass, glazed surfaces, or aluminum, as etching will occur. In case of accidental contact, rinse thoroughly and immediately with water.
- P-Wood is not meant to fill or seal visible cracks in wood.
- For surfaces not specified in our literature or if you are uncertain as to previous chemical treatments, (on the surface to which you are considering applying P-Wood), we recommend that P-Wood be applied to a small test area first.
- If P-Wood becomes frozen, thaw out completely and shake well to fully remix the material prior to using. Freezing will not harm the product.
Disclaimer
We believe this information to be true to the best of our knowledge. Our products are of the highest quality and uniform within manufacturing tolerances.
Since no control is exercised over product use, no warranty, expressed or implied, is made as to the suitability of products for a particular use or as to the suitability of products for a particular use or as to the effect of such use, and no liability is assumed, directly or indirectly.
Buyers and users are encouraged to conduct their own tests prior to application.