Cascade Clear Log Finish is the perfect product to follow application of Capture Stain or High Sierra Stain on your log home. Cascade provides a weather-repellant crystal clear finish while protecting against mildew discoloration and surface cracking of your logs or other vertical wood features of your log home such as log siding, wood trim, and hand peeled deck rails.
Algaecide Included in the New Improved Formula!
Cascade Clear Log Finish benefits:
- Water-based, easy to apply and clean up
- Use indoors and out, 100% VOC compliant
- Heavily loaded with biocides and UV inhibitors to help prevent mildew and block damaging ultraviolet light.
- Recommended finishing top coat for Sashco's Capture Log Stain, also compatible with other manufacturers’ products (verify compatibility before purchasing)
- Maintenance coat for Capture Log Stain and High Sierra Log Stain, can be applied repeatedly to extend the life of the underlying finish
- Lab and field tests have proven the Capture System (Capture log stain plus Cascade clear topcoat) to have superb resistance to chalking, fading, cracking, peeling, and loss of overall appearance.
- Ultra water repellant and dries crystal clear without altering the appearance of pigmented base coat, caulking, or chinking
Cascade Coverage Rate (depending on surface roughness)
300-600 sq. ft. per gallon
Click Here to Order Sample
Product Guide- Check that the pigmented coat of Sashco's Capture Log Stain is firm and set. Dry time is 4–24 hours, depending on temperature and humidity.
- Thoroughly stir Cascade before application to clean, stained, exterior logs. Use a garden sprayer or airless paint sprayer to apply and brush out runs.
- If the wood is very porous and the sheen on the logs is uneven after applying 1 coat of Cascade, multiple coats may be required for an even appearance.
*It is always good practice to try and protect logs as much as possible from exposure to moisture shortly after applying Cascade.
Cascade Technical Information
Packaging- One-gallon and five-gallon pails
Coverage Rate
- 300-600 sq. ft. per gallon, depending on surface roughness.
Application Range
- 40°F (4°C) and rising to 90° (32°C) and falling. In severe conditions (under 40°F (4°C) and/or 70%+ humidity), full rain resistance may take longer. Cover exterior walls with plastic if rainfall or snowfall is expected within 24 hours after application.
Recommended Wet Film Thickness
- 1 mil (use a gauge if in doubt)
Dry Time
- Cascade dries to touch in 30 minutes or less in ideal weather.
VOCs
- Less than 250g/L
Viscosity
- Water thin
pH
- 8.5-9.5
Density
- 8-9 lbs./gal.
Solids
- 18-25%
Odor
- Mild, sweet
Freeze-thaw
- Passes at least 5 cycles
Cascade Clear Log Finish is the perfect product to follow application of Capture Stain or High Sierra Stain on your log home. Cascade provides a weather-repellant crystal clear finish while protecting against mildew discoloration and surface cracking of your logs or other vertical wood features of your log home such as log siding, wood trim, and hand peeled deck rails.
Algaecide Included in the New Improved Formula!
Cascade Clear Log Finish benefits:
- Water-based, easy to apply and clean up
- Use indoors and out, 100% VOC compliant
- Heavily loaded with biocides and UV inhibitors to help prevent mildew and block damaging ultraviolet light.
- Recommended finishing top coat for Sashco's Capture Log Stain, also compatible with other manufacturers’ products (verify compatibility before purchasing)
- Maintenance coat for Capture Log Stain and High Sierra Log Stain, can be applied repeatedly to extend the life of the underlying finish
- Lab and field tests have proven the Capture System (Capture log stain plus Cascade clear topcoat) to have superb resistance to chalking, fading, cracking, peeling, and loss of overall appearance.
- Ultra water repellant and dries crystal clear without altering the appearance of pigmented base coat, caulking, or chinking
Cascade Coverage Rate (depending on surface roughness)
300-600 sq. ft. per gallon
Click Here to Order Sample
- Check that the pigmented coat of Sashco's Capture Log Stain is firm and set. Dry time is 4–24 hours, depending on temperature and humidity.
- Thoroughly stir Cascade before application to clean, stained, exterior logs. Use a garden sprayer or airless paint sprayer to apply and brush out runs.
- If the wood is very porous and the sheen on the logs is uneven after applying 1 coat of Cascade, multiple coats may be required for an even appearance.
*It is always good practice to try and protect logs as much as possible from exposure to moisture shortly after applying Cascade.
Cascade Technical Information
Packaging- One-gallon and five-gallon pails
Coverage Rate
- 300-600 sq. ft. per gallon, depending on surface roughness.
Application Range
- 40°F (4°C) and rising to 90° (32°C) and falling. In severe conditions (under 40°F (4°C) and/or 70%+ humidity), full rain resistance may take longer. Cover exterior walls with plastic if rainfall or snowfall is expected within 24 hours after application.
Recommended Wet Film Thickness
- 1 mil (use a gauge if in doubt)
Dry Time
- Cascade dries to touch in 30 minutes or less in ideal weather.
VOCs
- Less than 250g/L
Viscosity
- Water thin
pH
- 8.5-9.5
Density
- 8-9 lbs./gal.
Solids
- 18-25%
Odor
- Mild, sweet
Freeze-thaw
- Passes at least 5 cycles