NEW for 2025, ONEWOOD is a one-coat water repellent and stain that accentuates the natural beauty of exterior and interior wood. Penetrating pigments provide ultraviolet protection to keep the wood looking beautiful while maintaining water repellency. ONEWOOD is ideal for application to any unpainted exterior or interior wood surface, including siding, paneling, logs, decks, or fencing. Apply ONEWOOD to pressure-treated pine, cedar, redwood, clear pine, fir, spruce, and exotic hardwoods.
PROPER SURFACE PREPARATION
-
The surface must be clean and free of dirt, mildew, loose wood fibers, and other foreign matter.
-
Remove any tannin or extractive bleed, fastener rust, and discoloration.
-
When rinsing, use a power washer or garden hose along with a deck brush. The stain must penetrate the wood, and any prior coatings must be removed.
DIRECTIONS FOR USE
-
Do not apply if rain is forecast within 12 hours of the final application.
-
Shake and stir before and during use.
-
Before beginning the overall project, a test application must be performed to determine the proper method and desired color.
-
The finish color may vary depending on the porosity, color, and texture of the wood surface.
-
Apply with a brush, pad, or professional spray equipment.
-
When spraying, back-brush immediately to ensure uniformity.
-
Do not apply if the surface temperature is below 40°F or above 90°F.
-
Do not thin this product.
APPLICATION
-
To avoid lap marks, maintain a wet edge. Apply the stain, taking care to spread it evenly. Spread any excess stain that has pooled on the surface with a pad or brush.
-
One coat is recommended.
MAINTENANCE
MILDEW: Remove any mildew before staining. Mildew is not caused by the stain nor does it indicate a failure of the stain. Mold and mildew can grow on both treated and untreated wood. Regular cleaning can help maintain a clean wood surface.
EXTRACTIVE BLEED: Extractive bleed is not caused by this product nor does it represent product failure.
ANNUAL CLEANING: This product will not protect your wood from accumulating dirt, and dirty wood does not indicate product failure. Regular maintenance cleaning is recommended to maintain the clean appearance of your wood.
STORAGE AND DISPOSAL
CLEAN UP: Clean application equipment with soap and water.
DISPOSAL: Do not reuse the empty can. Dispose of contents and container in accordance with local, regional, national, territorial, provincial, and international regulations. Contact state and/or local agencies to ensure compliance with proper disposal procedures regulations.
STORAGE: Store in a well-ventilated area. Keep the container tightly closed when not in use. Store in a cool, dry location. Protect from freezing. Ensure this product is kept out of children's reach and stored away from food. Always keep this product locked up and in its original container.
NEW for 2025, ONEWOOD is a one-coat water repellent and stain that accentuates the natural beauty of exterior and interior wood. Penetrating pigments provide ultraviolet protection to keep the wood looking beautiful while maintaining water repellency. ONEWOOD is ideal for application to any unpainted exterior or interior wood surface, including siding, paneling, logs, decks, or fencing. Apply ONEWOOD to pressure-treated pine, cedar, redwood, clear pine, fir, spruce, and exotic hardwoods.
PROPER SURFACE PREPARATION
-
The surface must be clean and free of dirt, mildew, loose wood fibers, and other foreign matter.
-
Remove any tannin or extractive bleed, fastener rust, and discoloration.
-
When rinsing, use a power washer or garden hose along with a deck brush. The stain must penetrate the wood, and any prior coatings must be removed.
DIRECTIONS FOR USE
-
Do not apply if rain is forecast within 12 hours of the final application.
-
Shake and stir before and during use.
-
Before beginning the overall project, a test application must be performed to determine the proper method and desired color.
-
The finish color may vary depending on the porosity, color, and texture of the wood surface.
-
Apply with a brush, pad, or professional spray equipment.
-
When spraying, back-brush immediately to ensure uniformity.
-
Do not apply if the surface temperature is below 40°F or above 90°F.
-
Do not thin this product.
APPLICATION
-
To avoid lap marks, maintain a wet edge. Apply the stain, taking care to spread it evenly. Spread any excess stain that has pooled on the surface with a pad or brush.
-
One coat is recommended.
MAINTENANCE
MILDEW: Remove any mildew before staining. Mildew is not caused by the stain nor does it indicate a failure of the stain. Mold and mildew can grow on both treated and untreated wood. Regular cleaning can help maintain a clean wood surface.
EXTRACTIVE BLEED: Extractive bleed is not caused by this product nor does it represent product failure.
ANNUAL CLEANING: This product will not protect your wood from accumulating dirt, and dirty wood does not indicate product failure. Regular maintenance cleaning is recommended to maintain the clean appearance of your wood.
STORAGE AND DISPOSAL
CLEAN UP: Clean application equipment with soap and water.
DISPOSAL: Do not reuse the empty can. Dispose of contents and container in accordance with local, regional, national, territorial, provincial, and international regulations. Contact state and/or local agencies to ensure compliance with proper disposal procedures regulations.
STORAGE: Store in a well-ventilated area. Keep the container tightly closed when not in use. Store in a cool, dry location. Protect from freezing. Ensure this product is kept out of children's reach and stored away from food. Always keep this product locked up and in its original container.