A Non Toxic Alternative for Waterproofing Wood
There are times when the thought of using a hazardous wood preservative on wood that will be exposed to consistent moisture just doesn’t make sense for you. Suppose you are building a wooden vegetable garden box, a deck, dock, or wood bridge that is next to or over a pond, lake, or river. Contaminating the soil or water with preservatives is something you’d rather avoid, unless your project dictates the use of pressure treated wood due to building codes.
Internal Wood Stabilizer penetrates bare, untreated wood to harden and densify the wood to prevent water penetration below the surface of the wood.
Recommended for softwood species such as cedar, pine, fir, spruce, and redwood used in direct contact with consistent moisture such as fence posts, gardening boxes, shake roofs, decks, wood docks, wood siding and logs. Product does not have UV protection and will not fill or seal cracks or checks in wood.
Internal Wood Stabilizer is a ONE-TIME PERMANENT APPLICATION that chemically hardens and densifies softwood species used as fence posts, shake roofs, decks, wood siding and logs. . .
Material: Non-toxic liquid penetrates bare, untreated wood with catalyst that reacts with alkali in the wood to densify wood with glass crystals; forms an internal barrier against water, fungus and other causes of deterioration; shall increase bonding of finish coats by 300 percent. Does not contain UV protection. . . .
Discoloration: Product may flush contaminants such as natural tannin out of the wood which will darken or discolor the wood. Discoloration may be removed with Timber Pro UV Clean & Brite.
Coverage: 150 to 200 square feet (14 to 18.6 square meters) per gallon. 1-2 coats recommended.
Finish: Clear; leaves no apparent film or permanent visual change to the wood.
LEED Credit: Low Emitting Material 4.2.
A Non Toxic Alternative for Waterproofing Wood
There are times when the thought of using a hazardous wood preservative on wood that will be exposed to consistent moisture just doesn’t make sense for you. Suppose you are building a wooden vegetable garden box, a deck, dock, or wood bridge that is next to or over a pond, lake, or river. Contaminating the soil or water with preservatives is something you’d rather avoid, unless your project dictates the use of pressure treated wood due to building codes.
Internal Wood Stabilizer penetrates bare, untreated wood to harden and densify the wood to prevent water penetration below the surface of the wood.
Recommended for softwood species such as cedar, pine, fir, spruce, and redwood used in direct contact with consistent moisture such as fence posts, gardening boxes, shake roofs, decks, wood docks, wood siding and logs. Product does not have UV protection and will not fill or seal cracks or checks in wood.
Internal Wood Stabilizer is a ONE-TIME PERMANENT APPLICATION that chemically hardens and densifies softwood species used as fence posts, shake roofs, decks, wood siding and logs. . .
Material: Non-toxic liquid penetrates bare, untreated wood with catalyst that reacts with alkali in the wood to densify wood with glass crystals; forms an internal barrier against water, fungus and other causes of deterioration; shall increase bonding of finish coats by 300 percent. Does not contain UV protection. . . .
Discoloration: Product may flush contaminants such as natural tannin out of the wood which will darken or discolor the wood. Discoloration may be removed with Timber Pro UV Clean & Brite.
Coverage: 150 to 200 square feet (14 to 18.6 square meters) per gallon. 1-2 coats recommended.
Finish: Clear; leaves no apparent film or permanent visual change to the wood.
LEED Credit: Low Emitting Material 4.2.